UART — port initialization (uart_init)¶
What it does: Initializes the UART(1) hardware port with the selected speed, frame format and RX/TX pins.

Inputs¶
- Field
baud: baud rate (typically9600to115200). - Field
bits: number of data bits (7,8,9). - Field
parity: parity (None, even, odd). - Field
stop_bit: number of stop bits (1or2). rx_pin: RX pin number.tx_pin: TX pin number.
Output¶
- None (statement block).
When to use it¶
- Before using all blocks
uart_read_*anduart_write. - When communicating with sensors, modems, GPS or other MCU over a serial line.
Tips and pitfalls¶
- UART parameters must match the other side (baud, parity, stop bits).
- Verify wiring: TX device to RX ESP32 and vice versa.
Generated Python example¶
uart1 = UART(1, baudrate=115200, tx=17, rx=16, bits=8, parity=None, stop=1)